- e-Catalogue
KNX - Radio Frequency
RF input modules of EIB/KNX are used as interfaces for volt free contact and switches or conventional pushbuttons. Using these modules it is possible to control the electrical devices connected in the network by transmitting an RF signal. They can control RF output modules as well as TP wired products with the help of the media coupler TR131B. These products are particularly useful for renovating or extending existing installations.
2 or 4 inputs - 230V or Battery Operated - These input modules are available in following versions
2 or 4 input module version - flush mounted.
With power supply of 230V AC or with battery.
Installation
Link allocation is to be done by configuration device TX100GB. These products can also communicate with TP wired products with the help of media coupler TR131B.
General Characteristics of the Radio System
Frequency - 868.3 MHz
Range - variable according to the environment - up to 30m indoor, 100m in free air. Noise measurement is possible by TX100GB.
RF System
Maximum number of RF products = 256
Maximum number of RF input translations by the media coupler to twisted pair output products = 63
2 or 4 inputs - 230V or Battery Operated - These input modules are available in following versions
2 or 4 input module version - flush mounted.
With power supply of 230V AC or with battery.
Installation
Link allocation is to be done by configuration device TX100GB. These products can also communicate with TP wired products with the help of media coupler TR131B.
General Characteristics of the Radio System
Frequency - 868.3 MHz
Range - variable according to the environment - up to 30m indoor, 100m in free air. Noise measurement is possible by TX100GB.
RF System
Maximum number of RF products = 256
Maximum number of RF input translations by the media coupler to twisted pair output products = 63
Inputs
Cat ref. | Description | |||
---|---|---|---|---|
TRB302B | 2 flush mounted inputs mains powered | |||
TRM690G | Module 1 flush mounted output 200W, 2 wires + 2 inputs, KNX radio | |||
TRM693G | Module 1 flush mounted output 3A 230V + 2 inputs mains powered, KNX radio | |||
TRM694G | Module 1 FM output 4A free of potential + 2 inputs mains powered, KNX radio | |||
TRM702A | Binary 2 inputs device flush mounted battery powered KNX RF | |||
TRM692G | 1 FLUSH MOUNTED OUTPUT 3A FOR SHUTTERS OR BLINDS + 2 INPUTS KNX RF |
Inputs & Outputs
- Product supplied with input/ output module pre-configured for control of the connected output.
- Bi-directional product for transmitting and receiving.
Cat ref. | Description | |||
---|---|---|---|---|
TRB201 | 1 flush mounted output 16A mains powered |
Remote Control
Radio Receivers
Radio Transmitters
Motion Detectors
Dimmers
Cat ref. | Description | |||
---|---|---|---|---|
TRM691E | Module 1 flush mounted dimmer 200W, 2 wires + 2 inputs, KNX radio |
Window Contact
Control for Latching Relay & Timer
Data is subject to errors and technical modifications.