Give us a call
Downloads
Look through our Project Reference Brochure
Find where our wholesalers are located
 

BEAMA Guides

Hager is proud to be a technical contributor to these guides which provide technical advice on a range of I.S.10101 related topics.

BEAMA Guide to Arc Fault Detection Devices (AFDD's)

Arc Fault Detection Devices represents a new category of additional protection against fire caused by arc faults in AC final circuits. I.S.10101 Wiring Regulations recommends the use of AFDDs for certain applications. This BEAMA guide provides detailed technical information and application guidance for AFDDs in electrical installations.

Beama Guide To Surge Protection Devices (SPD's) - Selection, Application & Theory

This Guide is intended as a practical guide for designers, specifiers and installers to enable them to comply with surge protection requirements in I.S.10101 Wiring Regulations.

BEAMA RCD Handbook - Guide To The Selection & Application Of RCD's

The RCD Handbook: BEAMA Guide to the selection and application of Residual Current Devices (RCDs):..

This Guide provides specifiers, installers and end users, clear guidance on the selection and application of the wide range of RCDs now available. It details the specific applications of Types AC, A, F and B RCDs which are now recognised in I.S.10101 Wiring Regulations. Guidance is also given on the installation and maintenance of RCDs, including many of the installation conditions that cause ‘unwanted tripping’

BEAMA Technical Bulletin RCD Selection 2017-11

BEAMA publishes a Technical Bulletin to aid specifiers, installers and end users in selecting appropriate residual current protection for specific applications. The Bulletin addresses the selection and application of Types AC, A, F and B Residual Current Devices (RCDs).