250A Invicta 3 Type B Distribution Boards
invicta 3 type B distribution board are the solution for modern commercial installations.
250A Distribution Boards Glazed
Invicta 3 (250A Incoming, 63A Outgoing)
Surface mounted steel enclosures, IP3X rated available with a glazed door. Fully shrouded copper busbar, rated 25kA short circuit conditional current. Supplied without incoming and outgoing devices. Hager incoming kits must be used.
Complies with BS EN 61439-3.
The Hybrid Distribution Board combines 2x Triple Pole ways of 27mm MCB devices to supply end loads up to 125A, with standard 18mm MCB/RCBO's for other smaller loads.
Surface mounted steel enclosures, IP3X rated available with a glazed door. Fully shrouded copper busbar, rated 25kA short circuit conditional current. Supplied without incoming and outgoing devices. Hager incoming kits must be used.
Complies with BS EN 61439-3.
The Hybrid Distribution Board combines 2x Triple Pole ways of 27mm MCB devices to supply end loads up to 125A, with standard 18mm MCB/RCBO's for other smaller loads.
Cat ref. | Description | |||
---|---|---|---|---|
JK212BG | 250A 12 Way TPN Board Glazed Door | |||
JK216BG | 250A 16 Way TPN Board Glazed Door | |||
JK218BG | 250A 18 Way TPN Board Glazed Door | |||
JK20210BG | 250A 2+10 Way Hybrid TPN Board With Glazed Door | |||
JK20216BG | 250A 2+16 Way Hybrid TPN Board With Glazed Door | |||
JK20220BG | 250A 2+20 Way Hybrid TPN Board With Glazed Door | |||
JK20220BGSD | 250A 2+20 Way Hybrid TPN With Switch Disconnector and Glazed Door | |||
JK224BG | 250A 24 Way TPN Board Glazed Door | |||
JK208BG | 250A 8 Way TPN Board Glazed Door |
250A Distribution Boards Plain
Invicta 3 (250A Incoming, 63A Outgoing)
Surface mounted steel enclosures, IP3X rated available with a plain door. Fully shrouded copper busbar, rated 25kA short circuit conditional current. Supplied without incoming and outgoing devices. Hager incoming kits must be used.
Complies with BS EN 61439-3.
The Hybrid Distribution Board combines 2x Triple Pole ways of 27mm MCB devices to supply end loads up to 125A, with standard 18mm MCB/RCBO's for other smaller loads.
Surface mounted steel enclosures, IP3X rated available with a plain door. Fully shrouded copper busbar, rated 25kA short circuit conditional current. Supplied without incoming and outgoing devices. Hager incoming kits must be used.
Complies with BS EN 61439-3.
The Hybrid Distribution Board combines 2x Triple Pole ways of 27mm MCB devices to supply end loads up to 125A, with standard 18mm MCB/RCBO's for other smaller loads.
Cat ref. | Description | |||
---|---|---|---|---|
JK208B | 250A 8 Way TPN Board Plain | |||
JK212B | 250A 12 Way TPN Board Plain Door | |||
JK216B | 250A 16 Way TPN Board Plain Door | |||
JK218B | 250A 18 Way TPN Board Plain Door | |||
JK20220BSD | 250A 2+20 Way Hybrid TPN With Switch Disconnector and Plain Door |
250A Incomer Kits
These incomer kits will only fit Hager 250A boards. JK21604C requires a 450mm space below the board for fitting.
250A Meter Packs
Only to be fitted into 250A boards.
This kit fits into the main distribution board. For sub billing metering applications please contact our Technical Service Centre on 01952 675689.
Each meter pack contains; meter, 3 pole CT block, 3x fuses & carriers on DIN rail, wiring loom, incoming shroud, instructions (including torque settings for electrical connections).
This kit fits into the main distribution board. For sub billing metering applications please contact our Technical Service Centre on 01952 675689.
Each meter pack contains; meter, 3 pole CT block, 3x fuses & carriers on DIN rail, wiring loom, incoming shroud, instructions (including torque settings for electrical connections).
Cat ref. | Description | |||
---|---|---|---|---|
JK240PM |
250A DIN Extension Boxes
Extension boxes are available with plain, glazed & Amendment 3 compliant doors, they contain a DIN rail chassis for mounting modular devices. Full width enclosures provide 16 modular ways per row.
Complies with BS EN 62208.
Complies with BS EN 62208.
250A Cable Spreader Boxes & Optional Door Kits
250A Side DIN Boxes
No picture available
Side extension boxes provide a new concept for distribution boards to allow DIN rail mounted modular devices to be horizontally or vertically attached to distribution boards. All Side DIN Boxes come supplied with two removable gland plates.
Complies with BS EN 62208.
Complies with BS EN 62208.
Cat ref. | Description | |||
---|---|---|---|---|
JK216BDFG | JK216 96 Module Side DIN Box Glazed |
Data Logger
- Instant access and data logging plus 1 temperature input.
- Up to 8 pulsed inputs (CP1 - CP8).
- Transfer data via Ethernet, RS232/485.
- Logs up to 100 days of data from every 1 to 60 second intervals.
- DIN or direct fixing.
- 2 part terminals for easy conneciton.
- Works seamlessly on an Intranet with a fixed IP address.
Cat ref. | Description | |||
---|---|---|---|---|
JK107DL | 8 Input Data Logger TCP/IP Output |
Trunking Kit (100mm 4")
Each trunking kit contains a trunking channel, lid, lid joining brackets, connecting brackets and end caps.
Note: 4” trunking not suitable for JKD Power & Lighting Boards
Note: 4” trunking not suitable for JKD Power & Lighting Boards
Trunking Kit (150mm 6")
Each trunking kit contains a trunking channel, lid, lid joining brackets, connecting brackets and end caps.
Accessories
Cat ref. | Description | |||
---|---|---|---|---|
JK250BSP | 250A Single Phasing Kit | |||
JK030BEB | Earth Bar Hi Int, 2 x 15 Connections | |||
JK100TAP | JK 100A Top Tap Off Kit | |||
JK222PK | JK1/JK2 Door Lock Kit | |||
KRN190 | Neutral connecting block 100A | |||
JK01B | Single Pole Busbar Blank | |||
JK2PLATEM | Spare Gland Plate 1.2mm | |||
JKLABELPACK | Spare Label Pack - All Sizes (One Pack) |
Data is subject to errors and technical modifications.