250A Invicta 3 Panelboards

The last few years have seen a major change in the design and installation of commercial electrical distribution systems. The panelboard is at the heart of such a system, whether acting as the main incoming board or as part of the sub distribution. Modern electrical distribution systems require additional technologies such as fast transient surge protection and energy metering.
Construction
  • Enclosures manufactured from 1.2mm DC01M cold reduced mild steel, phosphate pretreated and powder coated to 00a01 BS4800.
 
Specification
  • Enclosures manufactured from 1.2mm DC01M cold reduced mild steel, phosphate pretreated and powder coated to 00A01 BS4800.
  • Complies with BS EN 61439-2.
  • Enclosure degree of protection: IP3X.
  • Internal separation Form 3A.
  • 4, 6, 8, 12, 16 Triple Pole outgoing ways
  • Removable side/top and bottom gland plates
 
Cable Capacity Outgoers
  • 1 & 3 pole MCCB 70mm² flexible.
  • 1 & 3 pole MCCB 95mm² solid.
 
Busbar rating
  • Busbar rated current 250A continuous.
  • Busbar rated short-time withstand current 25kA for 1s direct connected (unconditional).
 
Outgoing MCCBs
  • Single pole 16-125A (10 ratings).
  • Fixed thermal, fixed magnetic trips.
  • Triple pole 25-125A (6 ratings), adjustable thermal fixed magnetic trips.
  • Form 3B is achieved using the optional terminal shield (see MCCB accessories).

250A Incoming 125A Outgoing Glazed Door

JN204BG 250A 4 Way 125A Outgoers Glazed  CE
JN204BG
Comprises of enclosure, pan assembly, twin neutral and earth bar. Supplied without incoming kit (a Hager 250A incomer kit must be used).
Cat ref.  Description  
JN204BG250A 4 Way 125A Outgoers Glazed
prt.
JN206BG250A 6 Way 125A Outgoers Glazed
prt.
JN208BG250A 8 Way 125A Outgoers Glazed
prt.
JN212BG250A 12 Way 125A Outgoers Glazed
prt.
JN216BG250A 16 Way 125A Outgoers Glazed
prt.

250A Incoming 125A Outgoing Plain Door

No picture available
Construction
  • Enclosures manufactured from 1.2mm DC01M cold reduced mild steel, phosphate pretreated and powder coated to 00a01 BS4800.
 
Specification
  • Enclosures manufactured from 1.2mm DC01M cold reduced mild steel, phosphate pretreated and powder coated to 00A01 BS4800.
  • Complies with BS EN 61439-2.
  • Enclosure degree of protection: IP3X.
  • Internal separation Form 3A.
  • 4, 6, 8, 12, 16 Triple Pole outgoing ways
  • Removable side/top and bottom gland plates
 
Cable Capacity Outgoers
  • 1 & 3 pole MCCB 70mm² flexible.
  • 1 & 3 pole MCCB 95mm² solid
 
Busbar rating
  • Busbar rated current 250A continuous.
  • Busbar rated short-time withstand current 25kA for 1s direct connected (unconditional).
 
Outgoing MCCBs
  • Single pole 16-125A (10 ratings).
  • Fixed thermal, fixed magnetic trips.
  • Triple pole 25-125A (6 ratings), adjustable thermal fixed magnetic trips.
  • Form 3B is achieved using the optional terminal shield (see MCCB accessories).
Cat ref.  Description  
JN204B250A 4 Way 125A Outgoers Plain
prt.
JN206B250A 6Way 125A Outgoers Plain
prt.
JN208B250A 8 Way 125A Outgoers Plain
prt.
JN212B250A 12 Way 125A Outgoers Plain
prt.
JN216B250A 16 Way 125A Outgoers Plain
prt.

250A Incomer Kits

No picture available
Cable Capacity Incomers
  • 3 and 4 pole MCCB cable capacity 185mm² max lug width 25mm.
  • 3 and 4 pole non auto MCCB cable capacity 185mm² max lug width 25mm.
  • Direct connection kit.
  • M8 hexagonal bolt.
  • (Larger cables can be connected by using extended connections).
Cat ref.  Description  
JN223BM250A 3 Pole MCCB Incomer Kit
prt.
JN224BM250A 4 Pole MCCB Incomer Kit
prt.
JN223BS250A 3 Pole Isolator Incomer Kit
prt.
JN224BS250A 4 Pole Isolator Incomer Kit
prt.
JN224BD250A 4 Pole Direct Connect Incomer kit
prt.

Side Meter Enclosures

JN11004SM 6*8 Way Side Extension Encl DIN 96 x 4
JN11004SM
  • Blanking plates not included.
Note: When selecting JN meter encosures add a 'CE' suffix to the panelboard reference (e.g. JN208BGCE) to receive the panelboard with pre-cut side cable entries. 
Cat ref.  Description  
JN9502SM4 Way Side Extension Encl 950mm DIN 96 x 2 Meters
prt.
JN11004SM6 *8 Way Side Extension Encl 1100mm DIN 96 x 4 Meters
prt.
JN12506SM12 Way Side Extension Encl 1250mm DIN 96 x 6 Meters
prt.
JN15508SM16 Way Side Extension Encl 1550mm DIN 96 x 8 Meters
prt.

Top/Bottom Meter Enclosures

JN3003TM 300mm Top Extension 3x dIN96
JN3003TM
Cat ref.  Description  
JN3003TM300mm Top Extension
prt.
JF96BPBlanking Plate DIN 96
prt.

Corner Filler Enclosures

No picture available
Cat ref.  Description  
JN300CF300mm Corner Filler Side Enclosure JN
prt.

DIN Extension Boxes

JN201BE Small DIN Rail Box Plain
JN201BE
DIN Extensions Boxes have plain or glazed doors and DIN rail chassis.
Cat ref.  Description  
JN203BEGLarge DIN Rail Box Glazed
prt.
JN203BELarge DIN Rail Box Plain
prt.
JN201BEGSmall DIN Rail Box Glazed
prt.
JN201BESmall DIN Rail Box Plain
prt.

Cable Spreader Boxes

JN205BE Small Extension Box,  No Door
JN205BE
Cable spreader boxes are used for additional cabling space therefore do not require doors. If doors are desired optional door kits are available.
Cat ref.  Description  
JN205BESmall Extension Box, No Door
prt.
JN206BELarge Extension Box, No Door
prt.
JN205DKJN205 Spare Door
prt.
JN206DKJN206 Spare Door
prt.

Meter Packs

No picture available
Comprises of a digital multi function meter, 3 x control circuit fuse carriers, wiring harness and CTs. The meter pack fits directly into the main panelboard.
Cat ref.  Description  
JN201PMJN MF Meter Pack 250A Pulsed and Modbus
prt.

Accessories

JK222PK_IMG
JK222PK_IMG
Cat ref.  Description  
JN2PLATEJN Endplate
prt.
JK222PKJK1/JK2 Door Lock Kit
prt.
JN001BPSingle Pole Blank 125A Frame
prt.
HXA039HPadlock (x160-P160-x250-P250-x630)
prt.

250A Rated Pan Assemblies

No picture available
Cat ref.  Description  
JN204BPA250A 4 Way Pan Assembly
prt.
JN206BPA250A 6 Way Pan Assembly
prt.
JN208BPA250A 8 Way Pan Assembly
prt.
JN212BPA250A 12 Way Pan Assembly
prt.
Data is subject to errors and technical modifications.