Give us a call
Downloads
Look through our Project Reference Brochure
Find where our wholesalers are located
 

KNX - Radio Frequency

RF input modules of EIB/KNX are used as interfaces for volt free contact and switches or conventional pushbuttons. Using these modules it is possible to control the electrical devices connected in the network by transmitting an RF signal. They can control RF output modules as well as TP wired products with the help of the media coupler TR131B. These products are particularly useful for renovating or extending existing installations.
 
2 or 4 inputs - 230V or Battery Operated - These input modules are available in following versions
2 or 4 input module version -  flush mounted.
With power supply of 230V AC or with battery.
 
Installation
Link allocation is to be done by configuration device TX100GB. These products can also communicate with TP wired products with the help of media coupler TR131B.
 
General Characteristics of the Radio System
Frequency - 868.3 MHz
Range - variable according to the environment - up to 30m indoor, 100m in free air. Noise measurement is possible by TX100GB.
 
RF System
Maximum number of RF products = 256
Maximum number of RF input translations by the media coupler to twisted pair output products = 63

Inputs

TRB302B Module 2 inputs FM 230V KNX
TRB302B
Cat ref.  Description  
TRB302BModule 2 inputs flush mounted 230V KNX QL
prt.
TRM690GModule 1 flush mounted output 200W, 2 wires + 2 inputs, KNX radio
prt.
TRM693GModule 1 flush mounted output 3A 230V + 2 inputs mains powered, KNX radio
prt.
TRM694GModule 1 FM output 4A free of potential + 2 inputs mains powered, KNX radio
prt.
TRM702ABinary 2 inputs device flush mounted battery powered KNX RF
prt.
TRM692GModule 1 flush mounted output 3A for shutters or blinds + 2 inputs, KNX radio
prt.

Inputs & Outputs

TRB201 Module 1 output 16A flush mounted KNX
TRB201
  • Product supplied with input/ output module pre-configured for control of the connected output. 
  • Bi-directional product for transmitting and receiving.
Cat ref.  Description  
TRB201Module 1 output 16A flush mounted KNX
prt.

Remote Control

TU402 2-channel remote control
TU402
  • These are portable radio emitters of EIB/KNX standard. 
  • The remote controls are available in 4, 8 or 24 ways. 
Cat ref.  Description  
TU4022-channel remote control
prt.
TU4044-channel remote control
prt.
TU4066-channel remote control
prt.
TU41818-channel remote control
prt.

Radio Receivers

TRE201 Module 1 output 10A IP55 KNX radio
TRE201
Cat ref.  Description  
TRE201Module 1 output 10A IP55 KNX radio Quicklink
prt.
TRE202Module 2 outputs 10A IP55 KNX radio Quicklink
prt.
TRE221Module 1 output for shutter/blind 10A IP55 KNX radio QL
prt.
TRE400Module 1 input + 1 output, 10A, IP55, KNX radio
prt.
EK056RF receiver 868,3Mhz 8A, wall mounted, 230V
prt.

Radio Transmitters

TRE301 RF external single push button
TRE301
Cat ref.  Description  
TRE301RF external single push button wall mounted
prt.
TRE302RF external double push button wall mounted
prt.

Motion Detectors

TRE520 Motion detector RF white
TRE520
Cat ref.  Description  
TRE520Motion detector radio, with battery, IP55, white
prt.
TRE521Motion detector radio, with battery, IP55, anthacite
prt.
TRE530Motion detector IR solar, radio, IP55, surface mounted, white
prt.
TRE531Motion detector IR solar, radio, IP55, surface mounted, anthracite
prt.
TRE600LED floodlight with PIR 220/360° RF QL white
prt.
TRE720Kit motion detector RF + 1 output receiver 10A KNX IP55
prt.

Dimmers

TRM691E Mod. 1FM dimmer 200W 2 wires+2inputs KNX
TRM691E
Cat ref.  Description  
TRM691EModule 1 flush mounted dimmer 200W, 2 wires + 2 inputs, KNX radio
prt.

Window Contact

TRC301B Radio Window contact,  KNX,  Quicklink
TRC301B
Cat ref.  Description  
TRC301BRadio Window contact battery-powered, KNX, Quicklink, White
prt.

Twilight Sensor

TRC321B Light/twilight RF sensor,  white
TRC321B
Cat ref.  Description  
TRC321BLight and twilight radio sensor, batterie powered, white
prt.

Control for Latching Relay & Timer

TRM600 CONTROL FOR LATCHING RELAY TIMER KNX RF
TRM600
Cat ref.  Description  
TRM600Control for latching relay, timer KNX radio
prt.
Data is subject to errors and technical modifications.