Enhanced Vega Consumer Units
The new Vega Enhanced Consumer Units are fitted with an 80A rated main isolator, and an 80A RCD, making these consumer units particularly suitable for use with enhanced 16kVa supplies. Enhanced supplies are often used in larger one-off houses, and in installations with heat pumps. The brass terminals can accommodate cables of CSA up to 25mm2 , and the insulated busbars have been upgraded to 100A, thus enabling full use of the enhanced supply. The fully assembled and wired consumer units are available in 2-row 36-module, 3-row 54-module, and 4-row 72-module versions, for convenient fitting of additional devices.
Vega Enhanced Consumer Unit Installation in Crosshaven, Cork, with RMC Electrical
Ross McCarthy of RMC Electrical demonstrates the ease of installation of the Vega Enhanced Consumer Unit.6903801.8224
Enhanced 16kVa supplies are often used in larger one-off houses, and in installations with heat pumps. The brass terminals can accommodate cables of CSA up to 25mm2, and the insulated busbars have been upgraded to 100A, thus enabling full use of the enhanced supply. The fully assembled and wired consumer units are available in 2-row 36-module, 3-row 54-module and 4-row 72-module versions, for convenient fitting of additional devices.
Since their introduction these new consumer units have been favourably received by electrical contractors…
“A large part of my business is one off domestic dwellings, this type of installation often requires an enhanced ESB supply, meaning the standard 63A rated boards are inadequately rated. Until now there hasn’t been an off the shelf standard product available, resulting in time spent sourcing and assembling the products ourselves. Since the new Hager Vega enhanced supply board became available we have saved a lot of time and have a quality product available from the wholesaler. The fact that it conforms to the EN 61439-3 standard gives me peace of mind that I am installing a quality product”. - Aidan O’Shea, A1 Electrical, Cork.
The enhanced consumer units use the stylish new design Vega enclosures. The shade band, the silver handle, and the sloped face on the door, are some of the distinctive features of this new design.
According to Erwin Van Handenhoven, Design Director at Hager Group, “our mission is to model the future, evolving the electrotechnical domain by designing the shapes of tomorrow and setting new trends”.
Internally there are a whole host of innovations including unique rotating fixing slots, cable guides for tidier internal wiring, and removeable top and bottom entry plates with pre-marked entries for tubing or trunking. A range of additional features such as label holders, document clips, and rotatable doors make for a neat and professional finish to the installation.
A wide range of accessories such as plain and transparent doors, key locks, cable entry plates, and terminal supports, are available to meet all installation requirements.
The enhanced consumer units conform to the EN 60670-24 and EN61439-3 standards for domestic distribution boards.
For further information contact technical.service@hager.ie
Since their introduction these new consumer units have been favourably received by electrical contractors…
“A large part of my business is one off domestic dwellings, this type of installation often requires an enhanced ESB supply, meaning the standard 63A rated boards are inadequately rated. Until now there hasn’t been an off the shelf standard product available, resulting in time spent sourcing and assembling the products ourselves. Since the new Hager Vega enhanced supply board became available we have saved a lot of time and have a quality product available from the wholesaler. The fact that it conforms to the EN 61439-3 standard gives me peace of mind that I am installing a quality product”. - Aidan O’Shea, A1 Electrical, Cork.
The enhanced consumer units use the stylish new design Vega enclosures. The shade band, the silver handle, and the sloped face on the door, are some of the distinctive features of this new design.
According to Erwin Van Handenhoven, Design Director at Hager Group, “our mission is to model the future, evolving the electrotechnical domain by designing the shapes of tomorrow and setting new trends”.
Internally there are a whole host of innovations including unique rotating fixing slots, cable guides for tidier internal wiring, and removeable top and bottom entry plates with pre-marked entries for tubing or trunking. A range of additional features such as label holders, document clips, and rotatable doors make for a neat and professional finish to the installation.
A wide range of accessories such as plain and transparent doors, key locks, cable entry plates, and terminal supports, are available to meet all installation requirements.
The enhanced consumer units conform to the EN 60670-24 and EN61439-3 standards for domestic distribution boards.
For further information contact technical.service@hager.ie
