•  
  • Our Company
  • Products e-Catalogue
  • Solutions
  • Downloads
    Case Studies

125A Invicta 3 Type B Distribution Boards

Invicta 3 type B distribution boards are the solution for modern commercial installations.

125A Distribution Boards Glazed Door

JK106BG 125A 6 Way TPN Board Glazed
JK106BG
Invicta 3 (125A Incoming, 63A Outgoing)
Surface mounted steel enclosures, IP3X rated available with a glazed door. Fully shrouded copper busbar, rated 25kA short circuit conditional current. Supplied without incoming and outgoing devices. A Hager incomer kit must be used.
 
Incoming cable sizes
125A & 100A 50mm2
63A 25mm2
 
Complies with BS EN 61439-3 Annex ZB.
 
4, 6 & 8 way units require a JK101SE to provide additional incoming cable space.
Amendment 3 compliant units contain a full metal cover & door to comply with BS EN 61439-3 including annex ZB.
Cat ref.  Description  
JK104BG125A 4 Way TPN Board Glazed
prt.
JK106BG125A 6 Way TPN Board Glazed
prt.
JK108BG125A 8 Way TPN Board Glazed
prt.
JK112BG125A 12 Way TPN Board Glazed
prt.
JK116BG125A 16 Way TPN Board Glazed
prt.
JK118BG125A 18 Way TPN Board Glazed
prt.
JK124BG125A 24 Way TPN Board Glazed
prt.

125A Distribution Boards Plain Door

JK106B 125A 6 Way TPN Board Plain
JK106B
Invicta 3 (125A Incoming, 63A Outgoing)
Surface mounted steel enclosures, IP3X rated available with a plain door. Fully shrouded copper busbar, rated 25kA short circuit conditional current. Supplied without incoming and outgoing devices. A Hager incomer kit must be used.
 
Incoming cable sizes
125A & 100A 50mm2
63A 25mm2
 
Complies with BS EN 61439-3
 
4, 6 & 8 way units require a JK101SE to provide additional incoming cable space.
Amendment 3 compliant units contain a full metal cover & door to comply with BS EN 61439-3 including annex ZB.
Cat ref.  Description  
JK106B125A 6 Way TPN Board Plain
prt.
JK108B125A 8 Way TPN Board Plain
prt.
JK112B125A 12 Way TPN Board Plain
prt.
JK116B125A 16 Way TPN Board Plain
prt.
JK118B125A 18 Way TPN Board Plain
prt.

125A Distribution Boards IP65

No picture available
Invicta 3 (125A Incoming, 63A Outgoing)
Suitable for three phase applications where a high IP rating is required. Available with either a steel or GRP enclosure. Supplied without incoming and outgoing devices. A Hager incomer kit must be used. Steel units ending BD are not suitable for outdoor use (constructed from mild steel, powder coated).
 
Available up to 125A direct connection with outgoing distribution, rated for MCBs from 0.5A to 63A.
 
Complies with BS EN 61439-3.
Cat ref.  Description  
JK104BD125A 4 Way IP65 Metal TPN Board Plain
prt.
JK104BF125A 4 Way IP65 GRP TPN Board Plain
prt.
JK106BD125A IP65 Metal TPN Board 6 Way PD
prt.
JK108BD125A 8 Way IP65 Metal TPN Board
prt.
JK108BF125A 8 Way IP65 GRP TPN Board
prt.
JK112BD125A 12 Way IP65 Metal TPN Board
prt.

125A Incomer Kits

JK11003S 100A 3 Pole JK1 Switch Incomer Kit
JK11003S
These incomer kits will only fit Hager 125A boards. JK10634C & JK11004C require a 300 or 450mm space respectively below the board for fitting.
Cat ref.  Description  
JK11003S100A 3 Pole JK1 Switch Incomer Kit
prt.
JK11004S100A 4 Pole JK1 Switch Incomer Kit
prt.
JK11253S125A 3 Pole JK1 Switch Incomer Kit
prt.
JK11254S125A 4 Pole JK1 Switch Incomer Kit
prt.
JK11254D125A Direct Connect Incomer Kit
prt.
JK11004RH100A 30mA 4 Pole RCCB Incomer Kit
prt.
JK11004RL100A 300mA 4 Pole RCCB Incomer Kit
prt.
JK11004RLD100A 300mA 4 Pole Time Delay RCCB Kit
prt.
JK11004RM100A 100mA 4 Pole RCCB Incomer Kit
prt.
JK11004RMD100A 100mA 4 Pole Time Delay RCCB Kit
prt.

125A Dual Meter Incomer Kits

JKD125BMP 125A Dual MF Meter Kit,  Pulsed
JKD125BMP
Each fully assembled (distribution boards supplied separately to be assembled on site) meter pack contains; 1x incoming switch, 2x meters, 2x 3 pole CT block, 3x fuses & carriers on DIN rail, wiring loom, incoming shroud, off set incoming links, neutral connection block, extension box with glazed doors, instructions (including torque settings for electrical connections).
Cat ref.  Description  
JKD125BMP125A Dual MF Meter Kit, Pulsed
prt.

125A Meter Packs

No picture available
Only to be fitted into 125A boards.
This kit fits into the main distribution board (when fitting a meter pack to a JK104B(G) & JK106B(G), a JK101SE is required to provide additional incoming cable space). For sub billing metering applications please contact our Technical Service Centre on 01952 675689.
 
Each meter pack contains: 1x meter, 3 pole CT block, 3x fuses & carriers on DIN rail, wiring loom, incoming shroud, instructions (including torque settings for electrical connections).
Cat ref.  Description  
JK140MPJK1 MF Meter Pack Pulsed Out
prt.

125A DIN Extension Boxes

JK116E JK1 16 Module DIN Rail Box Plain
JK116E
Extension boxes are available with plain, glazed & Amendment 3 compliant doors, they contain a DIN rail chassis for mounting modular devices. Full width enclosures provide 16 modular ways per row.
 
Complies with BS EN 62208.
Cat ref.  Description  
JK116EJK1 16 Module DIN Rail Box Plain
prt.
JK132EJK1 32 Module DIN Rail Box Plain
prt.
JK116EGJK1 16 Module DIN Rail Box Glazed
prt.
JK132EGJK1 32 Module DIN Rail Box Glazed
prt.

125A Cable Spreader Boxes & Optional Door Kits

JK101SE JK1 Small Cable Spreader Box
JK101SE
Cable spreader boxes are used for additional cabling space therefore do not require doors.  If doors are desired optional door kits are available.
 
Complies with BS EN 62208.
Cat ref.  Description  
JK101SEJK1 Small Cable Spreader Box
prt.
JK102LEJK1 Large Cable Spreader Box
prt.
JK102DKJK1 Large Extension Box Cover & Door Kit
prt.

125A Side DIN Boxes

JK104BDFG JK104 32 Module Side DIN box Glazed
JK104BDFG
Side extension boxes provide a new concept for distribution boards to allow DIN rail mounted modular devices to be horizontally or vertically attached to distribution boards. All Side DIN Boxes come supplied with two removable gland plates.
 
Complies with BS EN 62208.
Cat ref.  Description  
JK104BDFGJK104 32 Module Side DIN box Glazed
prt.
JK106BDFGJK106 32 Module Side DIN Box Glazed
prt.
JK108BDFGJK108 48 Module Side DIN Box Glazed
prt.
JK112BDFGJK112 64 Module Side DIN Rail Box Glazed
prt.
JK116BDFGJK116 80 Module Side DIN Box Glazed
prt.

125A Half Width Side Extension Boxes

JK104BSH
JK104BSH
Side extension boxes provide a new concept for distribution boards to allow cable ways to be fitted on site. All Side Extension Boxes supplied with two removable gland plates and can be used with Invicta 3 Panelboards JN & JF.
 
Complies with BS EN 62208.
Cat ref.  Description  
JK106BSHJK106 Half Width Side Extension Box
prt.
JK108BSHJK108 Half Width Side Extension Box
prt.
JK112BSHJK112 Half Width Side Extension Box
prt.

Data Logger

JK107DL 8 Input Data Logger TCP/IP Output
JK107DL
  • Instant access and data logging plus 1 temperature input.
  • Up to 8 pulsed inputs (CP1 - CP8).
  • Transfer data via Ethernet, RS232/485.
  • Logs up to 100 days of data from every 1 to 60 second intervals.
  • DIN or direct fixing.
  • 2 part terminals for easy connection.
  • Works seamlessly on an Intranet with a fixed IP address.
Cat ref.  Description  
JK107DL8 Input Data Logger TCP/IP Output
prt.

Trunking Kit (100mm 4")

No picture available
Each trunking kit contains a trunking channel, lid, lid joining brackets, connecting brackets and end caps.
 
Note: 4” trunking not suitable for JKD Power & Lighting Boards
Cat ref.  Description  
JK04TKTrunking Kit for TPN 4"
prt.
JK04TCTrunking Channel 4"
prt.
JK04TLTrunking Lid 4"
prt.
JK04TEEndcap for Trunking Kit 4"
prt.
JK04TJJoining Bracket for Trunking Kit 4"
prt.
JK04TPLid Joining Bracket 4"
prt.

Trunking Kit (150mm 6")

JK06TK Trunking Kit for TPN 6"
JK06TK
Each trunking kit contains a trunking channel, lid, lid joining brackets, connecting brackets and end caps.
Cat ref.  Description  
JK06TKTrunking Kit for TPN 6"
prt.
JK06TCTrunking Channel 6"
prt.
JK06TLTrunking Lid 6"
prt.
JK06TEEndcap for Trunking Kit 6"
prt.
JK06TJJoining Bracket for Trunking Kit 6"
prt.
JK06TPLid Joining Bracket 6"
prt.

Accessories

JK222A
JK222A
Cat ref.  Description  
JK222PKJK1/JK2 Door Lock Kit
prt.
JKLABELPACKSpare Label Pack - All Sizes (One Pack)
prt.
JK125BSP125A Single Phasing Kit
prt.
JK100TAPJK 100A Top Tap Off Kit
prt.
JK030BEBEarth Bar Hi Int, 2 x 15 Connections
prt.
KRN190Neutral connecting block 100A
prt.
JK1PLATEMJK1 Spare Gland Plate 1.2mm
prt.
Data is subject to errors and technical modifications.